Settings Menu

Reference Ground height
Allows to pick the ground height value by clicking in one of the 3D views. The value is used for displaying on the views 2D resources and is calculated as follows:

• On any image view : Z coordinate of the photo position view point minus the height offset of the camera above ground, see Orbit run configuration.
• 3D point cloud view : Z coordinate of the 3D viewpoint downwards intersection with the point cloud. This technique will only be used if no image view has been opened.

3D Stereo Mode
Choose from different stereo techniques to display the 3D View.

• Stereo Anaglyph
• Stereo Side-By-Side
• Stereo Side-By-Side (RHF)
• Stereo Side-By-Side (RVF)
• Stereo Top-Bottom

Additionally, follow focus and/or zoom can be switched on/off to optimize the personal viewing experience.

Measure Display CRS
Allows selecting a CRS for displaying measurements results. By default WGS84 will be used, additionally, measurements results can be displayed in the CRS of any resource included in the publication.

Measure Display Unit
Allows selecting meter, foot or yards as measuring unit.

Information about the measure techniques and point cloud hover settings :

• Measurements using Point Cloud
• Measurements using Images Only