Clash Detection

The goal of this exercise is to demonstrate to the user how to use the “Clash Detection” extension. The user will be able to adjust the parameters of the extension, in order to get the correct clash results according to one's project needs.

• Relevant for : 3DM Feature Extraction Pro

• Clash Detection

• Manage Orbit Runs and Projects
• Navigate Pointcloud

• AU Queensland/Orbit Runs
• AU Queensland/Reference Data

Before Getting Started

1. Switch Map Layout to Map 3D
2. Open/Add Mapping Run “AU Queensland”
3. Add Vector Resource “path.ovf”

Clash Detection Project

1. Open extension “Clash Detection”
2. Select Point Cloud “Point Cloud”
3. Create new Clash Detection Project
4. Define 3D Path
   Select the polyline from the “path.ovf” vector dataset. Make sure you can select objects from this dataset. Depending your Selection Preferences, the Vector Dataset must be set as Active Dataset to be able to select objects from this dataset.
5. Select Shape
   Select the shape 4000×4000
6. Position Shape on Path
   Ground height offset of 0.7m, centered horizontal alignment (2m each side).
7. Set Analyse Parameters
   Check Hits, Near hits and Ignore Ground Level.
   Set Min Points for cluster to 5 and Near Hits to 1m.
8. Run Clash Detection
   Once a 3D Path and a Shape a specified, the Clash Detection process can be executed. Clusters of detected clashes will be added to the result list one by one, beginning of the segment. The process will identify 21 clashes, including 11 Hits and 10 Near Hits.
9. Visualize Results
   Check “Show labels” and “Highlight selection”.
   Double click result [1] to focus and review the result. Set “Follow Up” or “Ok” if no follow up is required. Do the same for all detected clashes.
10. Advanced QC Results
    See Exercise.