This page describes how to use the desktop mobile mapping administration procedures Process Data: Ortho from Panoramas, Ortho from Point Cloud and Colorize Point Cloud.
Content Manager
Procedures > Mobile Mapping > Process Data
The “Ortho from Panoramas” and “Ortho from Point Cloud” procedures allow the user to process a 2D orthophoto. It might be very useful as background reference and for 2D digitizing. There are 2 options for producing orthos:
1. From the point cloud top view 1).
2. From the panoramas. Orthos from panoramas can only be made for the ground/floor area close to the camera positions
The “Colorize Point Cloud” procedure allows the user to add RGB values to a point cloud using the panorama images.
An example of the two vector files can be downloaded here: panorama_ortho.zip
Choose the reference to define the ground. Either a fixed ground height based on the camera height or a variable ground height based on the point cloud.
Choose the coordinate reference system of the Ortho Image that will be created. Note that these 2D orthos can only be produced in a projected coordinate system. Input data might be in any projection system (projected or geographical).
Resolution defines ground sample distance of the output in meters. It can be adjusted depending on the quality of the input data.
Radius defines extensions of the ortho: it is measured from the camera position.
The result is an orthoimage of the panoramas, stored as an Orbit Multiresolution Image within the Orbit Run structure (<Orbit Run directory>\panorama1_ortho\ortho.omi).
Choose the coordinate reference system of the Ortho Image that will be created. Note that these 2D orthos can only be produced in a projected coordinate system. Input data might be in any projection system (projected or geographical).
The resolution defines the pixel resolution expressed in meters of the point cloud images.
Depending on the density of your point cloud the resolution can be adjusted :
A legend for the point cloud image can be set.
If RGB and intensity information is available, an according image can be created. An image by fixed color or height is always possible.
Only one point cloud image can be created for each legend type:
RGB, intensity, height, fixed color.
The result is an orthoimage of the point cloud, stored as an OMI within the Orbit Run structure (<Orbit Run directory>\pointcloud_ortho\point_cloud_<legend>.omi).
Indicate how many photos are maximally used to colorize the pointcloud. Depending on the distance between the photo positions, increase or decrease this number.
Apply a mask on the imagery to exclude parts that shouldn't be used for colorisation. For example, parts of the vehicle. The mask can be created via the Mask Creator and will be automatically added to the dropdown list.
Set the mask color after selecting a mask.