Recent Changes

Differences

This shows you the differences between two versions of the page.

--- dev:viewer:menu:settings [2021/01/26 12:27]
paulien
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Viewer Settings ======
-This page documents the 3DM Viewer Settings. \\
-{{orbitgis:how_to_find.png?25&nolink |}} [[dev:products:3dm_viewer|]] > Sidebar > Settings icon
-===== General =====
-==== Viewer ====
-**Invert Zoom Direction**\\
-Option to reverse the direction of zooming when using the mouse wheel. \\
-Default settings (switch icon is disabled): Push away to zoom out
-**Show Focus Position** \\
-**Show Hover Position** \\
-**Reference Ground height** \\
-Allows picking the ground height value by clicking in one of the 3D views. \\
-The value is used for displaying 2D resources and is calculated as follows:
-  * On any image view: Z coordinate of the photo position viewpoint minus the height offset of the camera above ground, see [[dev:desktop_ext:mapping:manage:runs_version|Orbit run configuration]].
-  * 3D point cloud view: Z coordinate of the 3D viewpoint downwards intersection with the point cloud. This technique will only be used if no image view has been opened.
-**Geocoding Service** \\
-Change the [[dev:viewer:menu:search|geocoding service]] used in the viewer.
-  * Available for everyone: Google
-  * Available for companies based in Belgium: Geopunt
-**Sidebar Position** \\
-Set the position of the Sidebar, the Viewer Menu is placed at the opposite side of the Viewer.
-==== Synchronize ====
-The Synchronize Settings enable the auto-update the position and orientation of one View based on the changing position and orientation of another View. The auto-updated View(s) will try to copy the position, orientation, and/or focus coordinate of the View it is synchronizing with.
-Synchronize Views From Reference
-Synchronize Reference From Views
-=== Synchronize Views ===
-Auto-update the other Individual Views based on an Individual View.
-=== Synchronize Views From Reference ===
-Auto-update all Individual Views based on the Reference View.
-=== Synchronize Reference From Views ===
-Auto-update Reference View based on an Individual View.
-==== Resources ====
-**Show Resource Type** \\
-**Set resource visibility by view**\\
-Give the user the possibility to visualize certain resources in one or more specific views. The buttons with the numbers or R (for reference view) are visualized in the Resources Sidebar under the name of each resource.
-==== Reference View ====
-**Display Vector Resources** \\
-Option to make vector resources visible on the Reference View.\\
-**Allow multiple basemaps** \\
-===== Views =====
-==== All Views ====
-**Add focus to view to viewer actions menu** \\
-Add this option to the viewer action menu. When clicking 'Focus', all views are synchronized once to the chosen viewpoint.
-**Display viewing direction label** \\
-Option to display towards which wind direction the view modes are aimed. \\
-This label becomes visible under the view mode menu.
-==== 3D View ====
-**Display Base Map in 3D** \\
-Option to make the base map visible on the 3D view(s). The base map appears on the Reference Ground Height.\\
-**Drape Base Map on selected Terrain** \\
-Add 3D rendering to the base map. The z-values used for this are based on the chosen terrain model.
-**Stereo View Type** \\
-Option to choose from different stereo techniques to display the 3D View.\\
-  * Stereo Anaglyph
-  * Stereo Side-By-Side
-  * Stereo Side-By-Side (RHF)
-  * Stereo Side-By-Side (RVF)
-  * Stereo Top-Bottom
-==== Image Views ====
-**Overlay Point Cloud on Image** \\
-Option to display the Point Cloud on the image in the [[dev:viewer:viewmodes:3d|view modes]]. \\
-This can also be changed in the [[dev:viewer:sidebars:resources|Resources Sidebar]].
-**Display timestamp** \\
-Option to display the timestamp related to the image in the view mode. \\
-**Display photo id** \\
-Option to display the photo id related to the image in the view mode. \\
-**Add next/previous image by sequence to view action menu** \\
-Option to make the Sequence arrows visible in the View Mode Menu. This gives the user the possibility to jump from the current planar or spherical image to the next/previous one. \\
-** Get alternative images ** \\
-**Add image play-trough to view action menu** \\
-Option to make the play-through option visible in the View Mode Menu. The view mode will jump from one image to the next one automatically when the play-through is started. \\
-==== MM Planar and Spherical Image View ====
-**Maximum View Depth Point Cloud and Vector Resources** \\
-Options to adjust the view depth visibility of the point cloud and vector resources on the spherical and MM Planar image view (distance from the photo position). \\
-** Maximum Photo Search Distance ** \\
-==== UAS Planar Image View ====
-**Rotate Image to force north up**\\
-Option to choose if planar images should always face being rotated north up in the Planar View Mode. \\
-**Open automatically new best Image near edge of current image**\\
-When enabled, a new planar image will be opened in the Planar View Mode if the current image is dragged to the side. Drag to the left and a new planar image that is located on the right of the current image will be opened. \\
-**Maximum View Depth Point Cloud and Vector Resources**\\
-Options to adjust the view depth visibility of the point cloud and vector resources on the planar image view (distance from the photo position). \\
-===== Measuring =====
-**Measure Technique** \\
-Choose the desired technique used for measurements. \\
-Information about the measure techniques:
-  * [[dev:desktop:map:3d_measurements|Default 3D Measurement technique]]
-  * [[dev:technology:3d_mapping:measure_pointcloud|]]
-  * [[dev:technology:3d_mapping:measure_triangulation|]]
-  * [[dev:technology:3d_mapping:measure_reference_surface|]]
-**Hover Search Radius** \\
-Set the minimum and maximum value of the radius of the circle around the cursor in which point cloud points are searched to use for measurements. \\
-**Hover Gap Distance** \\
-**Display Coordinate Reference System** \\
-Allows selecting a CRS for displaying measurement results. \\
-By default WGS84 will be used, additionally, point measurement results can be displayed in the CRS of any resource included in the publication or one that is specified in the set-up of the publication.
-**Display Units of Relative Measurements** \\
-Allows selecting meter, foot or yards as measuring unit. \\
-===== Timeline =====
-**Enable Time Filter** \\
-If a Start and Stop date is defined in the [[dev:server:publisher_console:resources|Resource Specs]], the Timeline functionality allows to show the added resources grouped on a Timeline.
-**Set by** \\
-View - Workspace: A Timeline will be shown on each View, or one for the full workspace.
-**Group by** \\
-Day, Week, Month, Year: Resources will be grouped on the Timeline per Day, Week, Month or Year.

Last modified:: 2021/01/26 12:27