Recent Changes

Differences

This shows you the differences between two versions of the page.

--- dev:viewer:menu:settings [2019/02/18 16:33]
nathalie.moerman@orbitgt.com
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Settings Menu ======
-This page explains the Settings Menu of the [[dev:products:3dm_viewer_cloud|HTML5 Viewer]] and how to use it.
-The menu can be reached by the settings-icon on the bottom left of the viewer.
-==== Viewing ====
-{{:dev:webclient_html5:menu:settings_viewing.png?nolink&800|}}
-===General===
-**Display Point Cloud on Image**\\
-Option to display the Point Cloud on the image in the [[dev:webclient_html5:viewmodes:3d|view modes]]. \\
-This can also be changed in the [[dev:webclient_html5:sidebars:resources|Resources Sidebar]].
-**Display viewing direction label**\\
-**Invert Zoom DIrection**\\
-**Reference Ground height**\\
-Allows to pick the ground height value by clicking in one of the 3D views.
-The value is used for displaying on the views 2D resources and is calculated as follows:
-  * On any image view : Z coordinate of the photo position view point minus the height offset of the camera above ground, see [[dev:desktop_ext:mobile_mapping:manage:runs_version|Orbit run configuration]].
-  * 3D point cloud view : Z coordinate of the 3D viewpoint downwards intersection with the point cloud. This technique will only be used if no image view has been opened.
-===Reference View===
-**Display Vector Resources**\\
-===3D View===
-**Display basemap**\\
-**Drape basemap on Terrain Model**\\
-**Stereo View Type**\\
-Choose from different stereo techniques to display the 3D View.
-  * Stereo Anaglyph
-  * Stereo Side-By-Side
-  * Stereo Side-By-Side (RHF)
-  * Stereo Side-By-Side (RVF)
-  * Stereo Top-Bottom
-Additionally, follow focus and/or zoom can be switched on/off to optimize the personal viewing experience.
-===Image Views===
-**Next or previous image by sequence**\\
-===Oblique Views===
-**Follow Focus**\\
-**Follow Zoom**\\
-==== Measuring ====
-{{:dev:webclient_html5:menu:settings_measuring.png?nolink&800|}}
-**Measure Technique**\\
-**Hover Search Radius**\\
-**Hover Gap Distance**\\
-**Display Coordinate Reference System**\\
-Allows selecting a CRS for displaying measurements results. By default WGS84 will be used, additionally, measurements results can be displayed in the CRS of any resource included in the publication.
-**Display Units of Relative Measurements**\\
-Allows selecting meter, foot or yards as measuring unit.
-Information about the measure techniques and point cloud hover settings :
-  * [[dev:technology:3d_mapping:measure_pointcloud|]]
-  * [[dev:technology:3d_mapping:measure_triangulation|]]

Last modified:: 2019/02/18 16:33