This page describes the original Midas oblique mapping resources for Orbit import.
Use the corresponding Orbit Import Template to import the described original data.
It is recommend to read first Orbit Mapping Resource.
Today the Midas Camera 1 should not be imported, skip the import step and continue from Camera 2.
Filename,X,Y,Z,Omega,Phi,Kappa 002_0004_00005788,137955.641707,455873.325449,743.032408, 0.012064850,-0.784358977,-1.560480000 002_0004_00005789,137814.825564,455874.111392,742.723025, 0.010634448,-0.784480138,-1.570642214 002_0004_00005790,137673.525046,455875.456388,742.837419, 0.005307738,-0.784423327,-1.571384817 ...
CameraID Pixel size (mm) Image Width Image Height Focal length (mm) PPO_X PPO_Y k0 k1 k2 k3 P1 P2 B1 B2 CAM02 0.0049 7360 4912 84.9315 -0.15525 -0.03165 0 -0.0000182715 0.0000000224 0.0000000000 -0.0000000001 0.0000000001 0.0000000000 0.0000000000 CAM03 0.0049 7360 4912 84.9254 -0.15585 -0.08345 0 -0.0000176432 0.0000000203 0.0000000000 -0.0000000001 0.0000000002 0.0000000000 0.0000000000 CAM04 0.0049 7360 4912 85.0208 -0.18355 0.09635 0 -0.0000167020 0.0000000194 0.0000000000 0.0000000000 -0.0000000002 0.0000000000 0.0000000000 CAM05 0.0049 7360 4912 84.9167 -0.07655 0.07705 0 -0.0000181589 0.0000000216 0.0000000000 0.0000000002 -0.0000000003 0.0000000000 0.0000000000
For every camera it is required to review and adjust the default Orbit template camera calibrations, prior to the import.
<Orbit installation directory>/program/ext/obliques/project/template/<template_name>/planar<1,2,3,4,5>/import/import_locations.ord