This page describes UAS data processed in Pix4D for Orbit.
Using the corresponding template from 3D Mapping Data Preparation and Import Templates the described resources can be imported into Orbit.
It is strongly recommend to read first Concepts of Mobile Mapping and UAS data in Orbit.
imageName X/Long Y/Lat Z Omega Phi Kappa DJI_0870.JPG 2482725.560659 345684.821469 895.604221 -42.006029 -3.705921 -109.091568 DJI_0871.JPG 2482790.515404 345685.483699 896.707002 40.715067 -4.706115 -91.972336 DJI_0872.JPG 2482858.858022 345686.206525 897.050719 41.696087 -4.566736 -91.108750 ...
The camera calibration information can be found in the “Quality Report” exported from Pix4D
The camera calibration parameters must be entered before Create Run, the 1st step of the Import Run procedure.
To facilitate import, your specific camera calibration values can be registered inside the Orbit template to avoid entering these values at import each time. Contact Orbit Support if assistance is needed.
The ortho is not a part of the UAS Mapping Run, it can be added separately to the Map view.
Convert the Orthomosaic file into *.omi format for enhanced performance.