====== Measure Settings ======

This page documents the different Measure Settings. \\

===== General =====

**Measure Technique:** Choose the desired technique used for measurements. \\
Information about the measure techniques: 
  * [[2210:desktop:map:3d_measurements|Default 3D Measurement technique]]
  * [[2210:technology:3d_mapping:measure_pointcloud|]]
  * [[2210:technology:3d_mapping:measure_triangulation|]]
  * [[2210:technology:3d_mapping:measure_reference_surface|]]

**Display Coordinate Reference System:** Allows selecting a CRS for displaying measurement results. \\
By default WGS84 will be used, additionally, point measurement results can be displayed in the CRS of any resource included in the publication or one that is specified in the set-up of the publication.

===== Hover Display ====

**Show Hover:** Option to enable or disable the display of the 3D Hover. \\
**Transparency:** Set the transparency of the displayed hover. \\

===== Hover Pointcloud Query ====

**Hover Search Radius:** The minimum and maximum value of the radius of the circle around the cursor in which point cloud points are searched to use for measurements. \\
**Hover Gap Distance:** The minimum distance between two points in order not to be considered part of the same cluster. \\
**Min # Points:** The minimum amount of detected points to form the hover. \\
**Show Used Points:** Enable the highlighting of the used points inside the Search Radius. \\
**Show Search Radius:** Enable the display of the Search Radius. \\

===== Results ====

**Auto Save Measurements:** Avoid the step to hit the save button by automatically saving measurements. \\
**Display Units or Relative Measurements:** Allows selecting feet, meter, US Survey feet or yards as measuring unit. \\\\
**Limit decimals to:** Set the number of decimals in the measurements. \\