====== Preferences of Pole Attachments Detection =====

This page describes only the parameters and preferences of Pole Attachment measurements. \\
Full documentation about concept, workflow and sidebar, see [[2210:desktop_ext:automated_feature_extraction|]].
General concepts of Detectors Preferences, see [[2210:desktop:preferences:detectors|]].

===== Algorithm =====

=== Search Ring Radius ===

Radius around to pole to search for attachments. 

=== Search Ring Thickness  ===

Thickness of the ring to search for attachments.

=== Pole Ground Margin ===

Margin above the ground to search for attachments. Ground is the minimum Z value of the pole. 

=== Pole Top Margin ===

Margin above the top of the pole to search for attachments. 

=== Cluster Distance ===

Distance used to cluster points.

=== Cluster Points Minimum ===

Number of used points to create clusters.

=== Pole Search Radius ===

The radius around the measured coordinate to detect the pole. 
 
=== Pole Slice Size ===

The size of horizontal slices used to get the inclination of the pole. 

=== Get Attachments ===

Compute pole attachments. 

=== Apply Cable Detector ===

Try to identify at cables as pole attachments. Extra parameters to return cable and/or other attachments. 

===== Output =====

Define which points of pole are printed: the measured coordinate of the pole, the bottom and/or the top of the pole.
Attachments can be printed and snapped to the pole/branche.