====== Viewer Settings ====== This page documents the 3DM Viewer Settings. \\ {{orbitgis:how_to_find.png?25&nolink |}} [[2110:products:3dm_viewer|]] > Sidebar > Settings icon ===== General ===== ==== Viewer ==== === Invert Zoom Direction === Option to reverse the direction of zooming when using the mouse wheel. \\ Default settings (switch icon is disabled): Push away to zoom out === Show Focus Position === The focus position is displayed in all view with a green cross. === Show Hover Position === The hover position is displayed in all views with a red cross. === Reference Ground height === Allows picking the ground height value by clicking in one of the 3D views. \\ The value is used for displaying 2D resources and is calculated as follows: * On any image view: Z coordinate of the photo position viewpoint minus the height offset of the camera above ground, see [[2110:desktop_ext:mapping:manage:runs_version|Orbit run configuration]]. * 3D point cloud view: Z coordinate of the 3D viewpoint downwards intersection with the point cloud. This technique will only be used if no image view has been opened. === Geocoding Service === Change the [[2110:viewer:menu:search|geocoding service]] used in the viewer. * Available for everyone: Bing, Google * Available for companies based in Belgium: Geopunt === Sidebar Position === Set the position of the Sidebar, the Viewer Menu is placed at the opposite side of the Viewer. === Viewer Menu Position === Set the position of the viewer menu to the left or right. === View Action Menu Position === Set the position of the viewer menu to the center or left. ==== Synchronize ==== The Synchronize Settings enable the auto-update the position and orientation of one View based on the changing position and orientation of another View. The auto-updated View(s) will try to copy the position, orientation, and/or focus coordinate of the View it is synchronizing with. === Synchronize Views === Auto-update the other Individual Views based on an Individual View. === Synchronize Views From Reference === Auto-update all Individual Views based on the Reference View. === Synchronize Reference From Views === Auto-update Reference View based on an Individual View. ==== Resources ==== === Show Resource Type === Enable/disable the display of the resource type in the resource sidebar. === Set resource visibility by view === Display certain resources in one or more specific views. The buttons with the numbers or R (for reference view) are displayed in the Resources Sidebar under the name of each resource. ==== Reference View ==== === Display Vector Resources === Enable the display of vector resources on the Reference View.\\ === Allow multiple basemaps === Enable selecting multiple basemaps in the basemap selection menu. ===== Views ===== ==== All Views ==== === Add Download to viewer action menu === Add the action to download images or pointcloud to the view action menu. Available when the download setting is enabled in the publication setup. === Add focus to view to viewer actions menu === Add the action to focus all views on the current viewpoint. This is a one-time action. === Display viewing direction label === Display the wind direction to which the views are aimed. \\ The label is displayed under the view action menu. ==== 3D View ==== === Display Base Map in 3D === Display the base map in the 3D view(s). The base map appears on the Reference Ground Height.\\ === Drape Base Map on selected Terrain === Add 3D rendering to the base map. The z-values used for this are based on the chosen terrain model. === Stereo View Type === Choose from different stereo techniques to display the 3D View.\\ * Stereo Anaglyph * Stereo Side-By-Side * Stereo Side-By-Side (RHF) * Stereo Side-By-Side (RVF) * Stereo Top-Bottom ==== Image Views ==== === Overlay Point Cloud on Image === Display the Point Cloud on the image in the [[2110:viewer:viewmodes:3d|view modes]]. \\ This can also be changed in the [[2110:viewer:sidebars:resources|Resources Sidebar]]. === Display timestamp === Display the timestamp related to the opened in the view mode. \\ === Display photo id === Display the photo id related to the opened image in the view mode. \\ === Add next/previous image by sequence to view action menu === Add the Sequence arrows to the View Mode Menu. Navigate through the planar or spherical images via the arrows or hitting the up and down arrow in the active view. \\ === Get alternative images === Retrieve the list of alternative images when moving or adding a new image view. === Display photo positions at all times === === Add image play-trough to view action menu === Option to make the play-through option visible in the View Mode Menu. The view mode will jump from one image to the next one automatically when the play-through is started. \\ ==== MM Planar and Spherical Image View ==== === Maximum View Depth Point Cloud and Vector Resources === Options to adjust the view depth visibility of the point cloud and vector resources on the spherical and MM Planar image view (distance from the photo position). \\ === Maximum Photo Search Distance === ==== UAS Planar Image View ==== === Rotate Image to force north up === Option to choose if planar images should always face being rotated north up in the Planar View Mode. \\ === Open automatically new best Image near edge of current image === When enabled, a new planar image will be opened in the Planar View Mode if the current image is dragged to the side. Drag to the left and a new planar image that is located on the right of the current image will be opened. \\ === Maximum View Depth Point Cloud and Vector Resources === Options to adjust the view depth visibility of the point cloud and vector resources on the planar image view (distance from the photo position). \\ ===== Measuring ===== === Measure Technique === Choose the desired technique used for measurements. \\ Information about the measure techniques: * [[2110:desktop:map:3d_measurements|Default 3D Measurement technique]] * [[2110:technology:3d_mapping:measure_pointcloud|]] * [[2110:technology:3d_mapping:measure_triangulation|]] * [[2110:technology:3d_mapping:measure_reference_surface|]] === Hover Search Radius === Set the minimum and maximum value of the radius of the circle around the cursor in which point cloud points are searched to use for measurements. \\ === Hover Gap Distance === === Display Coordinate Reference System === Allows selecting a CRS for displaying measurement results. \\ By default WGS84 will be used, additionally, point measurement results can be displayed in the CRS of any resource included in the publication or one that is specified in the set-up of the publication. **Display Units of Relative Measurements** Allows selecting meter, foot or yards as measuring unit. \\ ===== Timeline ===== === Enable Time Filter === If a Start and Stop date is defined in the [[2110:server:publisher_console:resources|Resource Specs]], the Timeline functionality allows to show the added resources grouped on a Timeline. === Set by === View - Workspace: A Timeline will be shown on each View, or one for the full workspace. === Group by === Day, Week, Month, Year: Resources will be grouped on the Timeline per Day, Week, Month or Year. === Resource Group by === Parent, Children: Resources will be grouped using the Date settings of the Resource Group = Parent, or the single resources inside the group = children.