This is documentation of an archived release.
For documentation on the current version, please check Knowledge Base.

Coordinate Reference Systems

This page describes the use and application of Coordinate Reference Systems in Orbit.
For basic concepts and theory about the coordinate system, datum and projection, see Coordinate Reference System in Theory.
For information on CRS related to Mapping Resources, see Coordinate Reference Systems for Mapping Resources

Orbit supports Horizontal and Vertical Coordinate Reference Systems.
Geographic and projected Horizontal CRS can be used and combined on the fly. Geocentric CRS are supported but need be converted upon import to a supported Geographic or Projected CRS. Use of CRS units foot (ft) or US survey foot (USft) required special attention.

Horizontal CRS Definitions

EPSG registry

Orbit has the objective to support the most recent definition of horizontal coordinate reference systems as defined by the OGP (International Association of Oil and Gas Producers) and described in the EPSG library. Orbit respects the order of axes as defined by the EPSG Library.

Supported Projection methods (EPSG Code).
Missing methods are added upon request, contact Orbit support.

  • Hotine_Oblique_Mercator (9812)
  • Krovak_Oblique_Conformal_Conic (9819)
  • Lambert_Conformal_Conic_1SP (9801)
  • Lambert_Conformal_Conic_2SP (9802)
  • Lambert_Conformal_Conic_2SP_Belgium (9803)
  • Mercator_1SP (9804)
  • Mercator_1SP_Spherical (9841)
  • Oblique_Mercator (9815)
  • Oblique_Stereographic (9809)
  • Transverse_Mercator (9807)
  • Transverse_Mercator_South_Orientated (9808)

Supported Transformation methods (EPSG Code).
Missing methods and local grid-based corrections are added upon request, contact Orbit support.

  • Coordinate Frame Rotation (9607)
  • Geocentric transformation (9603)
  • Longitude rotation (9601)
  • Molodensky-Badekas (9636)
  • Position Vector transformation (9606)

Local Horizontal Definitions

Orbit supports Local Horizontal CRS and Grid Corrections as defined by local authorities.
New definitions are added upon request, contact Orbit support.

Local Horizontal CRS definitions are not available by default.

  1. Download, unzip and copy the CRS configuration files into the Orbit CRS directory
    <Orbit installation directory>/program/system/crs/
  2. Restart Orbit.
    The Local Horizontal CRS definitions are linked automatically to the corresponding EPSG code.

Note related to OSTN02 and OSTN15 for ESPG 27700, 29901 and 29903.

  • OSTN02 and OSTN15 Local Horizontal CRS grid definitions include the corresponding Local Vertical CRS definition.
  • OSTN02 and OSTN15 grid files cannot be combined! Both are using the same EPSG codes. Do not copy both versions in the Orbit CRS directory. It is the one or the other.
  • Orbit's technical implementation scheme for OSTN grid corrections, see Implementation Schemes of OSTN Grid Corrections.

Custom Horizontal CRS

Orbit supports Custom Horizontal CRS via a Prj file as defined by the OGC.

Copy the OGC structured Prj file into the Orbit CRS directory and restart Orbit:
<Orbit installation directory>/program/system/crs/

Following file name syntax must be applied to the copied Prj file :
<number>_<description>.prj

  • <number> must be larger than 1,000,000 and smaller than 2,000,000.
  • <description> is optional.
  • Example “1031370_Belge 1972 - Belgian Lambert 72.prj”
  • Scale_Factor : maximum 3 digits

The Custom Horizontal CRS will be available via the Orbit CRS Window by entering a) the projection name as stated in the prj content, b) its number as used in the prj file name, or c) via the CRS By Country list under Undefined Area.

Custom Data Transformation TOWGS84

Orbit embeds the latest set of TOWGS84 transformation parameters known by the EPSG library.
Customization for the Geodetic CRS can be set via <Install Dir>/program/system/crs/transformations_to_4326.ini.

  • Note : Strict data input is required within the.ini file. Data must imported Tab separated(reference transformations_to_4326.ini)

Snake Grids

Snake Grids are supported in orbit as Local Horizontal Definitions, see above.
These specific horizontal definitions combine a correction grid and a local projection.

World Coordinates > Snake Grid Coordinates

ETRS89/WGS84 coordinates > GSB > Corrected ETRS89/WGS84 coordinates1) > Local Projection > Snake Grid coordinates

The Grid Shift Binary (GSB) defines the raster to interpolate a correction for each global lat/lon coordinate(WGS84/ETRS89) to a corrected coordinate referencing an intermediate reference frame.
Next, a custom horizontal projection is applied to obtain cartesian coordinates from the geographic coordinates.

Vertical CRS Definitions

Global and Local Vertical CRS Definitions

Orbit supports Global and Local Geoid references for the combined use of WGS84 Ellipsoidal and Orthometric height.
New definitions are added upon request, contact Orbit support.

  • EPSG 3855, EGM2008 height 1x1, World, grid 1'x1'.
  • EPSG 3855, EGM2008 height 2.5x2.5, World, grid 2.5'x2.5'.
  • EPSG 3900, N2000 height, Finland - onshore.
  • EPSG 5610, HVRS71 height, Croatia - onshore.
  • EPSG 5613, RH2000 height, Sweden.
  • EPSG 5621, EVRF2007, Poland.
  • EPSG 5701, ODN height, United Kingdom.
    This Vertical CRS is included in the corresponding Local Horizontal CRS definition, see above.
    Configurations for 5701 include additional Vertical CRS:
    • EPSG 5740, ODN Orkney height.
    • EPSG 5741, Fair Isle height.
    • EPSG 5742, Lerwick height.
    • EPSG 5743, Foula height.
    • EPSG 5744, Sule Skerry height.
    • EPSG 5745, North Rona height.
    • EPSG 5746, Stornoway height.
    • EPSG 5747, St Kilda height.
    • EPSG 5748, Flannan Isles height.
    • EPSG 5749, St Marys height.
    • EPSG 5750, Douglas height.
  • EPSG 5703, North American Vertical Datum of 1988 for the conterminous United States as defined by National Geodetic Survey (NOAA).
    Definition based on GEOID12B: NAVD88-12B height (Metric)
    Definition based on GEOID18: NAVD88-18 height (Metric)
    Configurations for 5703 include additional Vertical CRS:
    • EPSG 6640, NMVD03 height, Northern Marianas Vertical Datum of 2003.
    • EPSG 6641, PRVD02 height, Puerto Rico Vertical Datum of 2002.
    • EPSG 6642, VIVD09 height, Virgin Islands Vertical Datum of 2009.
    • EPSG 6643, ASVD02 height, American Samoa Vertical Datum of 2002.
    • EPSG 6644, GUVD04 height, Guam Vertical Datum of 2004.
  • EPSG 5705, CR2005, Czech and Slovak Republics.
  • EPSG 5709, NAP height , The Netherlands.
  • EPSG 5710, Ostend height, Belgium.
  • EPSG 5720, NGF-IGN69 height, France.
  • EPSG 5731, Malin Head height, Ireland.
    This Vertical CRS is included in the corresponding Local Horizontal CRS definition, see above.
  • EPSG 5732, Belfast height, Northern Ireland.
    This Vertical CRS is included in the corresponding Local Horizontal CRS definition, see above.
  • EPSG 5773, EGM96 height 15x15, World, grid 15'x15'.
  • EPSG 5782, Alicante height, Spain.
  • EPSG 5783, GCG2011, Germany.
  • EPSG 5941,NN2000 height, Norway.
  • EPSG 6360, North American Vertical Datum of 1988 for the conterminous United States as defined by National Geodetic Survey (NOAA).
    Definition based on GEOID12B: NAVD88-12B height (ftUS)
    Definition based on GEOID18: NAVD88-18 height (ftUS)
  • EPSG 7839, NZVD2016, New Zealand.
  • EPSG 9245, CGVD2013, Canada.
  • EPSG 9988, ILUM 1.2, Israel.

Vertical CRS definitions are not available by default. This means that the vertical CRS can't be assigned to a horizontal CRS without relying on a resource representing the Geoid height. This resource doesn't exist by default in the software's installation folder.

  1. Download, unzip and copy the CRS configuration files into the Orbit CRS directory :
    <Orbit installation directory>/program/system/crs/
  2. Verify and enter if missing the EPSG codes (semicolon separated) of the Horizontal CRS that needs to be linked to the Vertical CRS into following Vertical CRS configuration file :
    vertical_<EPSG Vertical CRS>.ini
    For example:
    available.in.horizontal.crs 4326;3395;31370
  3. Restart Orbit.

Custom Vertical CRS Definitions

Orbit supports Custom Vertical CRS via a Geoid Height Raster definition.

In cooperation with the Orbit Support team, Geoid reference resource files can be converted into the required Orbit CRS configuration files.
One of the following resources representing the Geoid height 2) can be used to create the CRS configuration files :

  • Supported raster resource, see Supported Geodata Resources.
  • Esri ascii raster file.
  • XYZ ascii file space, comma or semicolon separated.

Custom Vertical CRS via Offset or Scaling

Scaled and offset vertical CRS definitions. Custom Vertical CRS relies on already existing EPSG codes.

Into the Orbit CRS directory :<Orbit installation directory>/program/system/crs/ :

  • Create a Vertical CRS prj file <EPSG Vertical CRS>_LocalOffsetVerticalCRS.prj.
    For example: 9999_LocalOffsetVerticalCRS.prj and add inside
    VERTCS["LocallOffsetVerticalCRS"]


  • Create a Vertical CRS configuration file : vertical_<EPSG Vertical CRS>.ini. Inside the file do the following:
  1. Define the type transformation
    type offset
  2. Enter the EPSG codes (semicolon separated) of the Horizontal CRS that needs to be linked to the Vertical CRS.
    For example:
    available.in.horizontal.crs 4326;3395;31370
  3. Add the value of the offset.
    For example:
    vertical.offset 20

Restart Orbit to acknowledge in the software the new custom CRS.

Inverted CRS definitions

Orbit follows CRS specifications, including the order of axis, as defined by the EPSG Authority.

Unfortunately, local authorities or other software might invert the order of axis to store or serve geospatial data. Especially for CRS defined to be Northing-Easting, data is often stored and served Easting-Northing. To consume user data provided as Easting-Northing, but defined by EPSG as Northing-Easting, Orbit introduced the Inverted CRS of an existing EPSG Code.
The inverted CRS are in the range of 3 million. E.g ESPG 3001 (NE) and 3003001 (EN).

All CRS defined by EPSG to be Northing-Easing are pre-added to the list of Inverted CRS, and any EPSG code can be added to this list: <Install Dir>/program/system/crs/inverted.ini

Datum Transformation

Datum transformations are applied as defined by EPSG on XY coordinates. Z values are conserved as is, no transformation is applied.
Datum transformation on Z values can be enabled e.g. to combine multiple 3D data resources with different ellipsoid height definitions.

See Orbit Desktop Startup Configurations > Datum Transformation on Z coordinate

International feet and US survey feet

Projected CRS using International feet (ft) or US survey feet (ftUS) units require special attention.

The Orbit Core and Map Components support Projected CRS using ft and ftUS. Orbit uses https://www.epsg-registry.org/ as the reference database. In the United States, the Federal definition of the CRS is metric at all times, but State law defines the CRS in International feet or US survey feet.

Map CRS

The Map CRS can be set to any CRS supported by Orbit - feet or metric. However, for optimal rendering performance, we do advise using the CRS of the resources that are currently viewed.

Absolute measurements (2D and 3D Coordinates) use the MapCanvas CRS. In case the vertical MapCanvas CRS is in feet, then the Z-coordinate will be visualized in feet in the measurement sidebar.

Resource CRS

A resource can have any CRS supported by Orbit - feet or metric. But be careful with the following:

  • Some Orbit Extensions expect data to be stored as meters or degrees to operate.
  • For Oblique, UAS, and Mobile Mapping resources and Vector Datasets, we do advise converting the CRS to the parent metric definition when importing the original resource files into the optimized Orbit Runs.
  • All resources of a run or project should have the same CRS.

When using these converted resources, display and exports can still be set to ft or ftUS to get exactly the expected results. A user won't notice the data is stored using the parent metric CRS.

Units of Measurements

Orbit Dataset CRS

Every single resource has a CRS.
If no Orbit dataset CRS is set, Orbit will read the resource assuming that dataset has the same coordinate system as the MapCanvas (see below). When combining resources with the different coordinate systems it is strongly recommended to define the coordinate system for every single resource.
Orbit supports imagery to be reprojected on the fly.

There are two ways to set the CRS of a dataset in Orbit :

The dataset CRS is saved in the Orbit Resource Descriptor file :

Orbit Map CRS

All visible datasets are re-projected on the fly, if the Dataset CRS differs from the Map CRS, to be rendered in the Map CRS.

The Map Display CRS has an impact on the map rendering performance.

Optimize Performance

Re-projecting datasets from their source Dataset CRS into another target Map CRS requires processing time. Consequently, large vector or point cloud resources will take more time to load and will slow down map rendering. It is advised to avoid on the fly re-projection by using the Dataset CRS as Map CRS. When using multiple resources having different Dataset CRS, it is advised to use the Dataset CRS of the resources having most vertices as Map CRS.

Deformations

Re-projecting means deforming. To retain shape, angles, and presentation it's again advised to use the Dataset CRS as Map CRS.

Define Map CRS

The Map CRS can be set via the Map Status Bar. .
Open the “Coordinate Reference System selection” window via a single click on the current Map Display CRS, see Map Statusbar.

The Map CRS on start-up is defined in the Orbit Workspace and can be controlled via the Map View Preferences.
See Orbit GIS Workspace file and Preferences of Map View.

Default behavior and preferences

If no datasets are visible in the current workspace then the first visible dataset CRS will be used as Map CRS.

1)
Intermediate Reference Frame
2)
Local Vertical CRS Definitions, Geoid height represents the height offset from Geoid reference to Ellipsoid reference. A Digital Terrain or Surface Model is not a Geoid Model.
 
Last modified:: 2024/02/13 12:17