This is documentation of an archived release.
For documentation on the current version, please check Knowledge Base.
For documentation on the current version, please check Knowledge Base.
Phoenix Lidar UAS
This page describes the original Phoenix Lidar aerial mapping resources for Orbit import.
Use the corresponding Orbit Import Template to import the described original data.
It is recommend to read first Orbit Mapping Resource.
Planars
Image files
- Image type : Original files.
- Image resolution : 6000×4000 pixels.
- File format : Each image is one *.jpg file.
- File name : Exactly as “Filename” value of photo position file, see below.
- Folder structure : All image files of one camera in one folder. Phoenix Lidar usual folder names are: cam0 and cam1
Image positions files
- File format : One ascii *.csv file per camera.
- File structure Rows : Each image is one record.
- File structure Columns : Comma seperated (char44), headers, with exact order as the example below.
- Value of Filename : File name as on disk with *.jpg file extension.
- Value of Coordinates : WGS84 geographical Lat/Long order (EPSG:4326), as exported by Phoenix Lidar, decimal notation, without thousands separator.
... # Columns: Filename, Vehicle Latitude, Vehicle Longitude, Vehicle Altitude, Vehicle Yaw, Vehicle Pitch, Vehicle Roll, Receptor Latitude, Receptor Longitude, Receptor Altitude, Receptor Yaw, Receptor Pitch, Receptor Roll, P4D Omega, P4D Phi, P4D Kappa, Time GNSS Week, Time GNSS TOW, Time GNSS Abs, Time GNSS Rel, Time GNSS Int, Time Cam Abs, Time Cam Rel, Time Cam Int, Time Host Retrieval, FrameCount Cam, Error Code, Error String cam0-000-000000-0.jpg, 55.789414897, 37.797834321, 167.893, 170.157, -178.135, -178.630, 55.789416393, 37.797834304, 167.824, 82.213, -57.384, -92.826, 4.955, 32.278, -12.047, 2119, 387535.306630, 1 281 958 735 306 630, 0, , -1, 0, , 1 281 958 737 654 000, -1, 0, cam0-000-000001-0.jpg, 55.789414897, 37.797834321, 167.893, 170.157, -178.130, -178.634, 55.789416393, 37.797834304, 167.824, 82.221, -57.380, -92.834, 4.951, 32.283, -12.048, 2119, 387537.406949, 1 281 958 737 406 949, 2 100 319, 2 100 319, -1, 0, , 1 281 958 739 668 000, -1, 0, ...
Camera calibration information
- File format : the camera calibration parameters are in each camera position file header (csv, see above)
# Camera settings at export: ... ,"receptors":[{"distortion":{"k1":-0.06567,"k2":0.0773,"k3":0.01971,"p1":0,"p2":0},"focalLength":{"x":15.89,"y":15.89},"pixelCount":{"x":6000,"y":4000},"principalPoint":{"x":2987.96,"y":1959.91},"size":{"x":23.4,"y":15.6},"transform"...
The camera calibration parameters from this file must be entered before clicking Create Run, the 1st step of the Import Run procedure.
To facilitate import, your specific camera calibration values can be registered inside the Orbit template to avoid entering these values at each import. Contact Orbit Support if assistance is needed.
LiDAR
Point cloud files
- File format : One or more supported point cloud file formats.
- File structure : Las/Laz or Ascii *.txt, *.csv file.
- Las (Usual Phoenix Lidar output, recommended) or Laz : Las version 1.2.
- Ascii File : Space separated (Char32), headers, with exact order as the example below. Line ends by carriage return char(13) and newline char(10) sequence.
- Value of Coordinates : Any coordinate system (usually a projected metric CRS for Phoenix Lidar). The user needs to fill the imported point cloud CRS in the Source CRS field.
See Import Run for more information on template usage and CRS selection
Long(X) Lat(Y) Z R G B I 4.40487692010655 50.8510926423286 125.763312461527 16 17 19 46 4.40487698750245 50.8510916370433 125.761583937394 16 17 19 46 ...
Last modified:: 2022/04/15 06:19