Import Mapping Run

This page describes the desktop administration procedure “Import Run”.

Procedures > Administration > Indoor/Mobile/UAS Mapping > Import Run

It is recommended to read first Concepts about Mobile Mapping data in Orbit.

The “Import Run” procedure imports and processes a set of raw mapping resources according a well defined Orbit Import Template into an Orbit Mapping Run.

The “Add Run” procedures can be used to link immediately already imported Orbit Mapping Runs to the Orbit setup.
More information on Add, Remove and Manage Runs, see Manage Mobile Mapping Runs.

The import procedure consists out of 2 consecutive wizards :

1. Create a new Orbit Run definition.
2. Import data according the selected Import Template.
   The available steps of this second wizard depends on the used Import Template.

Directory
Specify the directory where the new Run needs to be stored.
Remarks :

• Do not create a new Run inside an existing Run folder. If you do so, Orbit will recognize the structure and will Open the Run upon Create Run, see below.
• The original data will be organized and processed into the specified directory. Ensure fast access to storage access and sufficient disk space.
• On using Client/Server, special attention is required regarding data management and file access, see Manage Mobile Mapping in Client-Server.

Name
Enter the Run name.
Only alphabet characters, numbers, space, dash and underscore are accepted.
Special characters (like é # + & / * …) cannot be used and are replaced automatically into underscore.

Template
Select the Import Template to be used.
Depending the used Import Template, it might be required to select the coordinate system of the original import files. Do not use a Geographic template to import Projected resources and visa versa!
Use the according buttons to add, remove or download more templates, by default available generic templates cannot be removed.
More information on Import Templates, see MM Data Preparation and Import Templates.

Create Run
Click “Create Run” button to confirm. Upon confirmation the 2nd wizard to import data will start.

The the below documentation describes the import of local resources.
The wizard and parameters to establish a connection to an online service are dedicated for each provider.

Import trajectory file.

The trajectory import starts automatically upon selecting the trajectory file.
Proceed to the next step once the import is completed.
The availability of a trajectory is mandatory for Content Manager, but optional for Feature Extraction. When using Feature Extraction, you may want to skip the import of trajectory.

Import photo positions file and move images of the current camera. Repeat this for each available camera.

Import Positions
The photo positions import starts automatically upon selecting the photo position and orientation file.
Move images once the import is completed.

Move Images
Move or copy the image files to the indicated directory : <Orbit Mapping Run>/<camera>/original/. Optionally an image link.ini redirect file can be used to avoid data copy, see Orbit Run Versions & Structure.
Proceed to the next step once import and copy are completed.

Import point cloud files.

The point cloud import can be started automatically upon selecting the point cloud files or, using Content Manager, it is possible to delegate the import to the Task Manager.
Use Ctrl or Shift to select more point cloud files. All selected point cloud files will be merged into one Orbit Point Cloud file.
Proceed to the next step once import is completed or delegated to Task Manager.

Complete metadata. Finish when all steps are completed.